Power Tools; Scanwedge Ngw - Honeywell Dolphin 70e User Manual

Power Tools

When ordered as part of the Honeywell Wearable Solution, the following additional Power Tools are installed on the Dolphin 70e
Black terminal so that it can work with the ring scanner. This section will discuss software that is unique to the wearable version
of the terminal.

ScanWedge NGW

ScanWedge NGW is similar to the regular ScanWedge Power Tool loaded on all Dolphin 70e Black terminals. However,
ScanWedge NGW adds support for the 8620 ring scanner.
ScanWedge NGW sends data from a tethered ring scanner to the foreground application as keystrokes (as if the data were
entered via the keyboard). The foreground application is the open software application whose window is currently active on
the display. As a result, you can review input data in Windows Mobile applications such as Pocket Word, Pocket Excel, and
Inbox without having to load third-party applications.
Note: You must have ScanWedge NGW and a foreground application open to be able to scan bar codes. The scanner
lighting and aimer will not turn on if ScanWedge NGW and a foreground application are not running.
Launching ScanWedge NGW
Open Power Tools and tap the ScanWedge NGW icon once. ScanWedge NGW initializes and is running.
Command Bar Menu
When ScanWedge NGW is running, a smaller ScanWedge NGW icon appears in the command bar at the bottom
of the Today screen.
Tap this icon to open the command bar menu.
Menu Item
Enable
ScanWedge
Settings
About
Exit
Launching ScanWedge NGW at Startup
To run ScanWedge NGW automatically when the Dolphin terminal boots up,
Add a link to the ScanWedge NGW.exe in the \WINDOWS\STARTUP folder
4 - 2
This item ...
Enables and disables ScanWedge NGW without exiting ScanWedge NGW.
Exits ScanWedge NGW and opens ScanWedge.
Opens the ScanWedgeNGW.exm file in EZConfig Editor.
Opens the About screen for ScanWedge NGW.
Exits ScanWedge NGW. The icon no longer appears in the Command bar.