Ngw Settingsconfig - Honeywell Dolphin 70e User Manual

Continuous Scan Mode
Continuous Scan mode is disabled by default. When Continuous Scan is enabled, the scanner is continuously reading
bar codes (approximately one scan every 200 milliseconds) as long as the scan trigger is held. The data read is
processed by ScanWedge NGW and sent to the application. In normal mode (with Continuous Scan disabled), the
scan trigger must be released between scans.
To enable Continuous Scan:
1. Open the ScanWedge.exm file in EZConfig on the terminal.
2. Select Decode from the sections.
3. Under the Key column, double-tap on ContScan. Set the value to Enabled and then tap OK.
4. Select File > Save.
5. Select File > Tools > Launch Associated Application to restart ScanWedge.
6. Select File > Exit.
Duplicate Scans in Continuous Scan Mode
When Continuous Scan mode is enabled, there is a timeout period during which scans of the same bar code are
ignored by ScanWedge NGW and not passed to the application. The length of this timeout is set using ContS-
canDupTimeout in the Decode section of the ScanWedgeNGW.exm file. The default is 500 milliseconds (1/2 sec-
ond).
Because the scanner scans approximately once every 200 ms in continuous mode and the default duplicate time-
out period is 500 ms, duplicate scans can result in a good scan beep from the scanner yet the scanned data may
not be processed by ScanWedge NGW. In such a situations, it may be desirable to set the timeout to 200 ms.
However this also makes unintended duplicate scans of a bar code more likely.
To change the timeout period:
1. Open the ScanWedge.exm file in EZConfig on the terminal.
2. Select Decode from the sections.
3. Under the Key column, double-tap on ContScanDupTimeout. Set the value to the desired timeout and then
tap OK.
4. Select File > Save.
5. Select File > Tools > Launch Associated Application to restart ScanWedge.
6. Select File > Exit.

NGW SettingsConfig

To launch NGW SettingsConfig, open Power Tools and tap the NGW SettingsConfig icon once.
Orientation
The automatic screen rotation is disabled on the wearable version of the Dolphin 70e Black. Instead the screen is
locked in the selected orientation:
• Portrait
• Landscape (right-handed) - Designed for a right-handed person wearing the assembly on the left arm
• Landscape (left-handed) - Designed for a left-haded person wearing the assembly on the right arm.
4 - 4