Restricting The Use Of Remote Ui - Canon imageRunner 2545i Addendum Manual

6
Press [Yes] .
To quit, press [No].
7
Restart the machine .
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
To enable SSL communication, access the Remote UI On/Off settings and set the Use SSL setting to 'On' . (See
"Restricting the Use of Remote UI, " on p. 15.)

Restricting the Use of Remote UI

You can set whether to enable the Remote UI to operate the machine and change settings. If you
want to access the machine more securely from a web browser, enable SSL (Secure Sockets Layer) for
encrypted communications.
•
To make changes to the System Settings, enter the System Management mode. For details, see Chapter 1,
"Before You Start, " in the System Settings Guide .
•
Changes made to Remote UI On/Off become effective when the machine is restarted. To restart the machine,
turn it OFF, wait at least 10 seconds, and then turn it ON.
•
For more information on the Remote UI, see the Remote UI Guide .
•
To use the Remote UI, it is necessary to set up the communication environment. For help, see Chapter 2,
"Connecting the Machine to a TCP/IP Network, " in the System Settings Guide .
•
The default settings are as follows:
- Remote UI On/Off: On
- Use SSL: Off
1
Press
2
Press [ ] or [ ] until [Remote UI On/Off] appears → press [Remote UI On/
Off] .
(Additional Functions) → [System Settings] .
Updates Regarding Additional Functions
15