Hp Route; Hp Full Bit - Yamaha RX-V1200 Service Manual

RX-V1200/RX-V1200RDS/HTR-5490/RX-V2200
DSP THROUGH ~
CS (AAC/dts (ES auto))
Analog
Digital

5. HP ROUTE

This function is for YSS938 only. Sub DSP SDOB3 of YSS938 is selected for MAIN L/R output.
Using the sub-menu, it is possible to select the full-bit output at 0dB output level.
HP 0dB

HP FULL BIT

DSP THROUGH ~
HP ROUTE (Auto)
Analog
Digital
25
A/D
DIR
YSS938
• The signal is output including the head margin.
Head margin:
Main L/R: -18dBFS, Center: -6dBFS, Rear Center: -3dBFS, FL/FR: -6dBFS,
RL/RR: -18dBFS, SWFR: Add L/R signal at -20dBFS.
Reference data (PRE OUT)
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz
Condition
Both ch, -20 dBV, volume -10 dB -5.5 dBV
• The signal is output in digital full bit without including the head margin.
Reference data (PRE OUT)
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz
Condition
Both ch, -20 dBV, volume -20 dB +2.5 dBV
A/D
DIR
YSS938
CS49329
dts/AAC
Sub DSP
Main DSP
Through
MAIN L/R CENTER REAR C
- ∞
MAIN L/R CENTER REAR C
- ∞
CS49329
Main DSP Sub DSP
Thr/DD/dts Through
L/R
L/R
C
C/-
RC/SW
RC/SW
FL/FR
L/R
RL/RR
RL/RR
SWFR RL/RR
- ∞ - ∞ - ∞
SWFR RL/RR
- ∞ - ∞ - ∞
L/R
C
RC/SW
FL/FR
RL/RR