Functions In Diag Mode; Initial Settings Used To Start Diag - Yamaha RX-V1200 Service Manual

RX-V1200/RX-V1200RDS/HTR-5490/RX-V2200

• Functions in DIAG mode

In addition to the DIAG menu items, functions as listed below are available.
• Input selection, 6CH input
• Center/Rear/Rear Center/Sub-woofer level adjustment
• Muting
• Speaker relay A/B
• Power on/off
• Master volume
* Functions related to the tuner and the set menu are not available.
* It is possible to confirm Menu No.14 IF STATUS while keeping the signal process (operation status) of each DIAG menu
by using the input mode key of the main unit.

• Initial settings used to start DIAG

The following initial settings are used when starting DIAG.
When DIAG is canceled, these settings are restored to those before starting DIAG.
• Master volume: -40dB
• Input: DVD (6CH INPUT OFF)
• Effect level: 0dB
• Audio mute: OFF
• Speaker relay A/B: ON
• Speaker setting: LARGE / BASS OUT = BOTH
• DIAG menu: YSS938 (1. ANALOG BYPASS)
19