Cs-Yss - Yamaha RX-V1200 Service Manual

RX-V1200/RX-V1200RDS/HTR-5490/RX-V2200

3. CS-YSS

8 channels are made usable by CS49329. The signal enters YSS938 through the Sub DSP passage and then undergoes
through-output.
YSS938 Main DSP is selected for the Main L/R output. Using the sub-menu, it is possible to select full bit output at 0dB
output level.
CS-YSS 0dB
CS-YSS FULL BIT
DSP THROUGH ~
CS-YSS (Analog)
(Use of CS-YSS is not available
due to restriction of the passage.)
Analog
Digital
DSP THROUGH ~
CS-YSS (AAC/dts (ES off))
Analog
Digital
23
• The signal is output including the head margin.
Head margin:
Main L/R: -18dBFS, Center: -6dBFS, Rear Center: -3dBFS, FL/FR: -6dBFS,
RL/RR: -18dBFS, SWFR: Add L/R signal at -20dBFS.
Reference data (PRE OUT)
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz
Condition
Both ch, -20 dBV, volume -10 dB -5.5 dBV
• The signal is output in digital full bit without including the head margin.
Reference data (PRE OUT)
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz
Condition
Both ch, -20 dBV, volume -10 dB -5.5 dBV +0.5 dBV -3.0 dBV
A/D
DIR
YSS938
A/D
DIR
YSS938
MAIN L/R CENTER REAR C
-5.5 dBV
MAIN L/R CENTER REAR C
CS49329
Through
Main DSP Sub DSP
Through Through
CS49329
dts/AAC
Main DSP Sub DSP
Through Through
SWFR RL/RR
-5.5 dBV -2.5 dBV -5.5 dBV
SWFR RL/RR
-2.5 dBV +6.5 dBV
L/R
C
RC/SW
FL/FR
RL/RR
L/R
C
RC/SW
FL/FR
RL/RR