Operation; Sweeper Operation; Switching On And Off; Power Command - Black & Decker LSWV36 Instruction Manual

• Attach t hevacuum t ubeassembly to
thefaninlet o nthesweeper housing
(figure H}bylining upthetabs onthe
tubewith theslots onthesweeper
housing andpush inwards until
thelocking/release button i sfully
engaged. (figure H1}
• Vacuum t ube assembly canbestored
byhanging onawall w ith a nail, u sing
thebuilt i nhang hole ontheunderside
ofthetube.
ALWAYS WEAR SAFETY GLASSES. WEAR A FILTER MASK iF
THE OPERATION iS DUSTY. USE OF RUBBER GLOVES AND
SUBSTANTIAL FOOTWEAR IS RECOMMENDED WHEN WORKING
OUTDOORS. FOR HOUSEHOLD USE ONLY.
_WARNING: CUT HAZARD. When turning the tool off for tube
installation or any other reason, wait 10 seconds for the fan to
stop rotating before disassembly.
• Do not use in vacuum mode without the vacuum tubes and
collection bag in place.
• Always switch off and remove the battery when:
• Changing from blower to vacuum.
• The power supply cord has become damaged or entangled.
• You leave blower/vac unattended.
• Clearing a blockage.
• Checking, adjusting, cleaning or working on blower/vac.
Use blower/vac only in daylight or good artificial light.
SWITCHING ON AND OFF (FIGURE I)
ZLWARNING:
USE BOTH HANDS TO
GRiP THE PRODUCT FIRMLY WHEN
SWITCHING ON.
To switch the sweeper on, slide the on/off
switch forward.
To switch the sweeper off, slide the on/off
switch back.
z_CAUTION:
DO NOT POINT UNIT
DISCHARGE AT SELF OR BYSTANDERS.
POWER COMMAND (FIGURE J)
MAX POWER / MAX RUNTIME
The max power / max runtime feature
(J1) is located on the tool handle.
It allows you to optimize the tools
performance and boost the power as
needed.
• To choose max power, rotate dial
to setting 6. (most vacuuming tasks
require max power.)
• To maximize runtime rotate dial to setting 1.
• For a combination of both, rotate dial to setting from 2 to 5.
z_CAUTION: Always wear safety glasses. Wear a filter mask if
the operation is dusty. Use of gloves, long pants and
substantial footwear is recommended. Keep long hair and loose
clothing away from openings and moving parts. THIS SWEEPER
IS FOR HOUSEHOLD USE ONLY.
NOTE: Ensure the sweeper is switched off and the battery is
removed before attaching or removing the sweeper tubes. The
sweeper tube must be assembled to the housing before use.
Install battery after assembly just prior to use.