Setting Up A Wireless Connection; Troubleshooting - NETGEAR DG834G Setup Manual

Netgear DG834G 54 Mbps Wireless ADSL Firewall Router Set-up Guide
_________________________________________________________________________________________________

Setting Up A Wireless Connection

The DG834G by default will have wireless connectivity enabled. Provided you have a
wireless network adapter installed and enabled on your computer and you are within
range, you should be able to connect via a wireless connection, once the DG834G is
configured and connected to Bulldog.
You may also wish to setup Wireless Encryption or MAC address security filtering on
the DG834G to tighten network security. We would therefore strongly recommend
that you consult section 4 of the main DG834G manual before setting up a wireless
network or if you need to enable encryption for additional wireless security.

Troubleshooting

In the event that you have not been successful in connecting, we'd recommend you
run through the processes outlined in this document again. If that fails, check the
chapter on troubleshooting in the full version of this guide which you'll find at
www.bulldogbroadband.com/residential/support/online/equipment.asp
You will also find a helpful step-by-step guide on Bulldog's Welcome CD which was
sent as part of your Welcome pack. Whilst this is particularly useful for beginners,
there is also an interactive section on troubleshooting if you still need help.
________________________________________________________________________
xiii