Setting Up And Testing Wireless-N 150 Connectivity - NETGEAR WNR500 User Manual

• Manually Connect. The router logs in or logs out only when the user clicks Connect
or Disconnect in the Router Status screen.
– Idle Timeout. Your Internet connection is logged out if there is no data transfer during the
specified time interval.
• Domain Name Server (DNS) Address. If you know that your ISP does not automatically
transmit DNS addresses to the router during login, select Use These DNS Servers, and enter
the IP address of your ISP's primary DNS server. If a secondary DNS server address is
available, enter it also.
Note: If you enter or change a DNS address, restart the computers on your network
so that these settings take effect.

Setting Up and Testing Wireless-N 150 Connectivity

Follow these instructions to set up and test Wireless-N 150 connectivity. Once you have
established Wireless-N 150 connectivity, you can enable security settings appropriate to your
needs.
1. Select Wireless Settings under Setup in the main menu of the WNR500 router.
Figure 1-10
Configuring Basic Connectivity
N-150 2-Port Wireless Router WNR500 User Manual
v1.0, November 2011
1-11