Setting Up And Testing Basic Wireless Connectivity - NETGEAR WNR1000v3h2 User Manual

• Domain Name Server (DNS) Address. If you know that your ISP does not automatically
transmit DNS addresses to the router during login, select Use These DNS Servers, and
enter the IP address of your ISP's primary DNS server. If a secondary DNS server
address is available, enter it also.
Note: If you enter or change a DNS address, restart the computers on
your network so that these settings take effect.

Setting Up and Testing Basic Wireless Connectivity

Follow these instructions to set up and test basic wireless connectivity. Once you have
established basic wireless connectivity, you can enable security settings appropriate to your
needs.
1. Select Wireless Settings under Setup in the main menu of the WNR1000v3h2 router.
Figure 10.
2. As appropriate, select the region in which the wireless interface will operate.
Note: In North America, you will not be able to change the region setting.
3. For the wireless network name (SSID), use the default name, or choose a suitable
descriptive name. In the Name (SSID) field, you can enter a value of up to 32 alphanumeric
characters. The default SSID is NETGEAR.
16 | Chapter 1: Configuring Basic Connectivity
N150 Wireless Router User Manual