Advertisement
FUNCTIONAL DESCRIPTION
Installing or removing the battery cartridge 1422 and
1433
*Always switch off the tool before inser-
r
tion or removal of the battery cartridge.
*To remove the battery cartridge, with-
draw it from the tool while pressing the
buttons on both sides of the cartridge.
To insert the battery cartridge, align the
tongue on the battery cartridge with the
groove in the housing and slip it until it is
locked with a little click.
Do not use force when inserting the bat-
tery cartridge. If the cartridge does not
slide in easily, it is not being inserted cor-
rectly.
I
Button
Charging
Your new battery cartridge is not charged.
You will need to charge
it
before use. Use
the high capacity battery charger Model
DC1411 to charge the battery cartridge.
Plug the high capacity battery charger
into the proper A.C. voltage source. The
charging light will flash in green color.
*Insert the battery cartridge so that the
plus and minus terminals on the battery
cartridge are on the same sides as their
respective markings on the high capacity
battery charger. Insert the cartridge fully
into the port so that it rests on the charger port floor.
When the battery cartridge is inserted, the charging light color will change from green to
red and charging will begin. The charging light will remain lit steadily during charging.
When the charging light color changes from red to green, the charging cycle is complete.
The charging time is approximately one hour.
If you leave the battery cartridge in the charger after the charging cycle is complete, the
charger will switch into its "trickle charge (maintenance charge)" mode which will last
approximately 24 hours.
*After charging, unplug the charger from the power source.
CAUTION:
*The high capacity battery charger Model DC1411 is for charging Makita batten/ cartridge.
Never use it for other purposes or for other manufacturer's batteries.
When you charge a new battery cartridge or a battery cartridge which has not been used
for a long period of time, it may not accept a full charge. This is a normal condition and
does not indicate a problem. You can recharge the battery cartridge fully after discharg-
ing
it
completely and recharging a couple of times.
8
Advertisement
