Using One-Touch Speed Dialling - Canon Fax-L260i User Manual

Using One-Touch Speed Dialling

Once you have registered your numbers under one-touch speed dialling buttons, you
can use them to send documents as follows:
Be sure to adjust the document feed lever before loading your document. See page
5-6 for more details.
1. Prepare the document and load it, face down, into the Automatic Document
Feeder (ADF).
2. Press the one-touch speed dialling button assigned to the number to which you
wish to fax.
Ex:
3. Press START/COPY.
Chapter 4
If necessary, you can adjust the resolution and contrast. See page 5-13 for
more details.
The name registered under that one-touch speed dialling button is displayed.
If no name is registered, the number registered under that button will be
displayed.
If you mistakenly press the wrong one-touch speed dialling button, press the
STOP button then press the correct button.
If no fax number is assigned to the one-touch dialling button you press, the
LCD displays NO TEL #. If this happens, make sure you pressed the correct
button and that the number you want to dial is registered under that button.
If you do not press the START/COPY button within five seconds of pressing
the one-touch speed dialling button, the FAX-L260i will begin sending
automatically.
If an error occurs during sending, the FAX-L260i will print an error report. If
this happens, try sending the fax again. See "Faxing Problems" on page 9-20
for details about errors.
TEL=CANON Europe
Speed Dialling 4-13