Printing Problems - Canon Fax-L260i User Manual

Printing Problems

If you are having problems printing with the FAX-L260i, check the problems and
solutions listed in the following table.
Problem
The ALARM lamp comes
on and the FAX-L260i
beeps while printing?
Nothing prints?
Printout does not match
paper size?
The printout curls?
Chapter 9
Possible cause
The FAX-L260i may have a
paper jam.
The power cord may not be
plugged in securely.
The toner cartridge may
need to be replaced.
Paper may not be loaded
and aligned correctly in the
sheet feeder.
Your pages may include a
large amount of toner.
Solution
Clear any paper jams as
described earlier in this chapter.
If the FAX-L260i has no paper
jam, unplug it, wait five seconds,
then plug it in again. If the
problem is fixed, the ALARM
lamp will be off, and the LCD
display will show the date and
time (standby mode).
If the ALARM lamp stays on,
call your local authorised Canon
dealer or service centre.
Make sure the power cord is
plugged securely into the unit
and into a wall outlet.
Replace the toner cartridge. See
page 2-26.
Make sure the paper is loaded
correctly. See page 2-32.
Remove the printout as soon as
it exits the FAX-L260i and let it
dry, then roll it in the direction
opposite of the curl.
Frequently Asked Questions 9-27