Table of Contents
Advertisement
CLIP (Calling Line Identification Presentation)
Setting
Normally, the CLIP setting is set to ON, which notifies the receiving fax of your
ISDN number each time you call.
You can turn off this notification using the following procedure.
1. Press FUNCTION.
2. Use
3. Press START/COPY, then use
4. Press START/COPY, then use
5. Press START/COPY.
6. Press STOP to returns to standby mode.
See page 3-10 for details on registering your ISDN number.
When this function is set to OFF, the fax will answer calls for all telephone numbers
supplied with your ISDN connection.
5-44
Sending Faxes
or
to select TX SETTINGS.
FUNCTION
TX SETTINGS
or
to select TX CLIP.
TX CLIP
or
to select OFF.
08/10 1998 16:21
OFF
Chapter 5
Advertisement
Table of Contents
