Table of Contents
Advertisement
Polling to Receive Faxes
The FAX-L260i's polling feature allows you to request a document to be faxed to
you from another fax machine. The sender only needs to make sure the document is
on his fax machine and ready to be sent: when your FAX-L260i polls that machine,
the document is sent automatically. The FAX-L260i can poll any fax machine that
supports polling. (This process does not work in reverse, however: the FAX-L260i
cannot be polled by other fax machines.)
Polling a Fax Machine
To poll another fax machine and receive a document from it, do the following:
Before attempting to poll a fax machine, make sure that fax machine supports
polling.
Your FAX-L260i cannot be polled by another fax machine.
1. Press FUNCTION, then POLLING.
2. Use one-touch speed dialling or coded speed dialling to dial the fax number of
the fax machine you wish to poll.
The FAX-L260i begins receiving the fax automatically.
For polling using an ITU-T subaddress, you need to register the subaddress and
password under a one-touch speed dialling button or coded speed dialling code.
See page 4-3 (one-touch speed dialling) or page 4-15 (coded speed dialling) for
details.
If the sender is using a Canon fax machine which has the Polling ID function, ask
him to set the Polling ID of his fax machine to 255 (1111 1111 binary number).
For details on the Polling ID, refer to the sender's fax machine manual. In all
other cases the Polling ID is not a concern.
Chapter 6
You can only use one-touch speed dialling or coded speed dialling to dial a
polling fax number.
POLLING RX
TEL=
Receiving Faxes
6-7
Advertisement
Table of Contents
