Mitsubishi VS-45502 Owner's Manual page 85

SQV
Important:
_Important:
Using SuperQuickView
TM
(cont.)
adding channels directly to the list with the remote
control's SQV button
0 Use the channel controls or number buttons to tune the !IV.to
the channel you want to add to the list.
O Press and hold the SQV buttcm for about 2 seconds. The letters
"SQV" will appear under the .channel number, indicating that
the channel has been added to SuperQuickView
TM
memory.
Once you've added a channel to the SQV memory, the letters "SQV"
appear under the channel number any time the channel number is
displayed, even if you tune to the channel in another manner.
If the SuperQuickView
TM
memory is full, the letters "SQV" will flash
when you hold the SQV button for about 2 seconds. Use the steps
below and on the preceding page to replace a current
SuperQuickView
TM
channel with a new channel or to remove exist-
ing SuperQuickView
TM
selections.
removing channels from the list with the remote control's
CANCEL button
O Use steps O - O from "customizing the SuperQuickView _ list
with the menus" on the preceding page to _elLect the channel
position from the SuperQuickView
TM
list•
Press the CANCEL button on the remote control to clear the
entry. You can now add a SuperQuickView _ channel to the
blank entry.
Using the Advanced Features 83