Mitsubishi VS-45502 Owner's Manual page 58

+
m
Either "In memory" or.
"Not in memory" will appear.
[:>Important:
Adding and deleting channels
After all available channels have been memorized with the
"Memorize Channels" feature, channels with weaker signals can be
added or deleted with the following :procedure.
[] TV Main Menu
[] First Time Setup
[] Customize Display
[] Advanced Features
[] Select AIV Memory
r
1_'] ADJUST to select
ENTER to enter
MENU to exit menus
[] First Time Setup
[] Set the Clock ]
[] Memorize Channels
I
[] Add/delete Channels
[] Set A/V Network
r_ Convergence
[_ ADJUST to select
ENTER to enter
MENU to go back
[] Add/delete Channels
Antenna A
Indoodoutdoor)
F_ Channel : 003 ABCD
Not in memory
i
-] DJUST to select
ENTER to add
['_ MENU to go back
O Press the MENU button on the
remote control. The Main
Menu will aFpear on the screen.
O Use the ADJUST buttons to
select "First Time Setup".
Press ENTER.
Use the ADJUST buttons to
select "Add!delete Channels".
Press ENTER.
0 The "Add/delete Channels"
screen will appear. Use the
ADJUST buttons to select the
channel you would like to add
or delete.
(You can also use the
CHANNEL controls to change
channels in raemery.)
If a channel is labeled "In
memory", use tlhe CANCEL
button to remove it from
memory. If a channel is labeled
":Not in memory", use the
ENTER button to add it to
memory.
When you are finished adding and deleting channels, press
the HOME button to return to normal TV viewing.
Adding a channel to memory allows you to tune to the channel with
the CHANNEL up/down controls. If a channel is not in memory,
you can only tune to it with the number buttons.
In this menu, you must use the CHANNEL (A V) or ADJUST
(A V) buttons to change channels.
56 Chapter 3: Operating Your TV