Table of Contents
Advertisement
Customizing
the A/V memory
position
(cont.)
The Surround
setting
creates
simulated
stereo
and surround
effects.
You can set this setting
to "Off," "Simulate"
or "Hall".
• Select Off if you do not want to use any surround
effects.
• Select Simulate
if you are watching
a non-.stereo
program. _
Your TV will create
a simulated
stereo effect.
• Select Hall if you are watching
a stereo
program.
Your TV will
create
a simulated
surround
effect, making
the sound
seem to
extend
around
and behind
you using the TV's internal
speak-
ers.
The Speaker
function
allows you to turn the TV's internal
speak-
ers on or off.
• Choose On if you want to play the TV's sounci through
the TV's
built-in
speakers.
• Choose Off if you connected
your audio system
to your TV and
you want to play the sound of your TV through
the audio
system.
The Monitor
Out function
determines
how t_e TV will send an
audio signal to an audio system
or home theatre
receiver.
Your
choices are '_Variable" or "Fixed".
• If you choose Fixed,
the TV will send out an audio signal
at a
fixed volume level.
The level will not change
when you adjust
the TV's volume.
Use the controls
on your audio system to
adjust
the volume.
The fixed setting
is mo:_t useful when :you
can control the audio system's
volume
with a remote
control.
• If you choose Variable,
the TV's audio output
will change
when you adjust
the TV's volume.
If you use this setting
with
an audio system,
turn
the TV's volume all 1;he way down, _et
the audio system's
volume to an average
setting
and then
adjust
the TV's volume until you can hear _he signal.
The Level
Sound
selection
allows you to enable
the TV to auto-
matically
equalize
the volume
level of programs
that contain
significant
sound level differences
from one se=_ment to another;
for
example,
from regular
programming
to commercials.
To receive
the best audio fidelity for music programs,
it may be desirable
to
turn
this setting
off.
DImportant:
For proper
tone and volume balance,
you may w:[sh to turn off the
TV_s speakers
when using an external
audio sys_em.
Dlmportant:
Set the surround
setting
to "OFF" when using an A/V receiver
with
Dolby Pro Logic Surround.
Getting
Started
73
Advertisement
Table of Contents
