Table of Contents
Advertisement
MANUAL OPERATION
This part lights up.
RAS13EX9KS2_EN_CH(1-10).p65
One of the mode lights up.
Press the
1
Either
(CIRCULATION),
To set the Fan Speed.
2
Press
MED, LOW and select.
Fan speed display turns off after approximately 10
seconds if the operation does not start.
3
Press the
Operation.
Operation starts with a beep.
"Operation" lamp on the indoor unit turns on.
START
Press the
STOP
operation.
From next time, the operation which has been set by
the above steps 1-3 will be available just by pressing
the START/STOP button.
–
9
to select the Operating Mode.
(AUTO),
(COOL),
(FAN).
(FAN SPEED) button to select AUTO, HI,
Press the
Temperature.
Remote control's temperature
Increase
setting range is 16 ~ 32°C.
decrease
Room Temperature display turns
off after approximately 10
seconds if the operation does
not start.
(START/STOP) button to Start the
(START/STOP) button again to stop the
–
9
3/8/07, 3:40 PM
(DEHUMIDIFY),
to set the Room
Advertisement
Table of Contents
