Manual Operation - Hitachi RAC-32CNH2 Instruction Manual

MANUAL OPERATION [Heating
Please use under below condition when you want to set the function mode, room temperature and
fan speed by manually.
HEATING
Outdoor Temperature
21°C below
1
OPERATION MODE SELECTION
Every time you press the button, the mode will change as the below
sequence
(Auto) [ (Heat) [
2
ROOM TEMPERATURE SETTING
Up
C
Down
The cooling operation does not start if the
temperature setting is higher than the current
room temperature.
3
FAN SPEED SETTING
Every time you press the button, fan speed will change as the
below sequence.
HEATING }
COOLING
DEHUMIDIFYING
4
Press the
Operation start with a signal received sound "beep".
STOP Press the
As the settings are stored in memory in the remote control unit, you
only have to press the
same setting next time.
32CNH2 EN1
Dehumidify
DEHUMIDIFYING
Room Temperature Outdoor Temperature
16°C above
(Dry) [ (Cool)
Recommend Temperature
Heating 20~24°C
Dehumidify 20~26°C
Cooling 25~28°C
: AUTO [ HIGH [ MED [ LOW
: (
[ [
: LOW (FIXED)
: ( )
(START/STOP) button
(START/STOP) button
(Start/Stop) button in order to use the
8
Cooling]
COOLING
22°C above
HITACHI
C
)
[
– 8 –
3/25/05, 2:30
HITACHI
C
HITACHI
C
HITACHI
C