Manual Operation - Hitachi RAS-R10C-1 Instruction Manual

MANUAL OPERATION

I Please use under below condition when you want to set the function mode, room temperature and
fan speed by manually.
Room Temperature 16°C above
1
OPERATION MODE SELECTION
G
Every time you press the button, the mode will change as the below
sequence
(Auto) [ (Cool) [
2
ROOM TEMPERATURE SETTING
Up
Down
G
The cooling operation does not start if the
temperature setting is higher than the current
room temperature.
G
If the device uses for cooling when the
humudity is very high (over 80%) at indoor,
some dew may form and drop on the air outlet
grill of cooling unit.
3
FAN SPEED SETTING
G Every time you press the button, fan speed will change as the below sequence.
G
COOLING
CIRCULATION
NOTE
(Auto) : The FAN SPEED is HIGH at first and varies to MED or LOW
automatically when the preset temperature has been reached.
G
DEHUMIDIFYING
4
Press the
G
Operation start with a signal received sound "beep".
STOP Press the
G
As the settings are stored in memory in the remote control unit, you
only have to press the
DEHUMIDIFYING
(Dehumidify)
I Recommend Temperature
Cooling 25~28°C
Dehumidify 25~26°C
: AUTO [ HIGH [ MED [ LOW
}
: (
[
: LOW (FIXED)
: ( )
(START/STOP) button
(START/STOP) button
(Start/Stop) button next time.
COOLING
Outdoor Temperature 22-42°C
SILENT
SUPER
)
[ [
– 10 –
SILENT
SUPER
SILENT
SILENT
SUPER
SILENT
SUPER
SILENT
SILENT
SILENT