Manual Operation - Hitachi RAS-24G1R Instruction Manual

MANUAL OPERATION [Cooling
I Please use under below condition when you want to set the function mode, room temperature and
fan speed by manually.
Room Temperature 16°C above
1
OPERATION MODE SELECTION
G Every time you press the button, the mode will change as the below
sequence
(Auto) [ (Cool) [
2
ROOM TEMPERATURE SETTING
Up
°C
Down
G The cooling operation does not start if the
temperature setting is higher than the current
room temperature.
3
FAN SPEED SETTING
G
Every time you press the button, fan speed will change as the below sequence.
G
COOLING
CIRCULATION
NOTE
(Auto) : The FAN SPEED is HIGH at first and varies to MED or LOW
automatically when the preset temperature has been reached.
G
DEHUMIDIFYING
Dehumidify Function
When the room temperature is higher than the temperature setting: The device will dehumidify the room,
reducing the room temperature to the preset level.
When the room temperature is lower than the temperature setting: Dehumidifying will be performed with
the room temperature set slightly lower than the current room temperature, whatever the temperature
setting. The function will stop (the indoor unit will stop emitting air) as soon as the room temperature
becomes lower than the setting.
4
Press the
G
Operation start with a signal received sound "beep".
STOP Press the
G
As the settings are stored in memory in the remote control unit, you
only have to press the
DEHUMIDIFYING
(Dehumidify) [
I Recommend Temperature
Dehumidify 16~26°C
Cooling 25~28°C
: AUTO [ HIGH [ MED [ LOW
}
: (
[
: LOW (FIXED)
: ( )
(START/STOP) button
(START/STOP) button
(Start/Stop) button next time.
Dehumidify
G
COOLING
Outdoor Temperature 22-42°C
(Circulation)
HITACHI
)
[ [
– 10 –
Circulation]
G
°C
HITACHI
°C
HITACHI
°C
HITACHI
°C