Honeywell lynx touch User Manual page 42

USER FUNCTIONS USER FUNCTIONS
USER FUNCTIONS USER FUNCTIONS
Message Recording and Playback
NOTE: If you are trying to record a new message and the message center is already full, "Add New" will not
be displayed. If the message center is full all old messages must be deleted before new messages
can be recorded. See the Deleting Messages section.
Playing Message(s)
Deleting Messages
6. When you have finished recording, select
" ". The system displays the recorded
messages.
7. To record additional messages (if recording
time is available) repeat steps 1 through 3.
1. At the Message
message you wish to play.
2. Select "Play", the system plays your
message.
3. When you are finished listening to the
message, you may select. "Stop". If "Stop"
is not selected the system continues to
play the remaining messages.
4. When you have finished listening to the
messages, select " ". The system returns
to the Home Screen.
1. At the Message screen, select "Delete All".
The system deletes all messages.
2. When you have finished deleting the
messages, select " ". The system returns
to the Home Screen.
– 42 –
screen, select the