Specifications - Makita BKP140 Instruction Manual

ENGLISH
1. Button
2. Red indicator
3. Battery cartridge
4. Star mark
5. Pointer
6. Knob
7. Lock-off lever
8. Switch trigger
9. Planer blade
10. Rear base
11. Foot
12. Socket wrench
13. Bolt
14. Loosen
15. Tighten
16. Drum
17. Drum cover

SPECIFICATIONS

Model
Planing width
Planing depth
Shiplapping depth
No load speed (min
Overall length
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
..... Read instruction manual.
Intended use
The tool is intended for planing wood.
General Power Tool Safety
Warnings
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
6
Explanation of general view
18. Adjusting plate
19. Inside edge of gauge plate
20. Blade edge
21. Screw
22. Heel
23. Back side of gauge base
24. Gauge plate
25. Gauge base
26. Pan head screw
27. Planer blade locating lugs
28. Heel of adjusting plate
29. Set plate
30. Inside flank of gauge plate
31. Mini planer blade
32. Groove
33. Hex. flange head bolt
34. Nozzle
-1
)
END004-4
ENE001-1
GEA006-2
BKP140
82 mm
1.6 mm
9 mm
13,000
329 mm
3.3 kg
D.C. 14.4 V
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
35. Dust bag
36. Fastener
37. Elbow
38. Start
39. End
40. Cutting line
41. Edge fence (optional accessory)
42. Sharpening holder
43. Wing nut
44. Blade (A)
45. Blade (B)
46. Side (D)
47. Side (C)
48. Limit mark
49. Chip cover
50. Screwdriver
51. Brush holder cap
BKP180
2 mm
333 mm
3.4 kg
D.C. 18 V