Central User Management Window; Setting Up The Central User Management Server - Honeywell FUSION III DVR User Manual

Setup Options

Central User Management Window

Setting Up the Central User Management Server

________________________________________________________________________________________________________
68
DVR Management
User Management
Log In
Log Out
Exit
To set up a Central Management User Server follow these steps.
Install the Central Management User Software on a computer or DVR.
1.
2. Run the software and open Site Management. (Logging in may be necessary)
Add one or more DVRs to the list and click OK to save and exit Site Management.
3.
4. Open User Management.
5. Add users or update user settings and click Exit.
Minimize the Central User Management Software.
6.
If the software is closed, any updates made on the DVRs will not be
Note
broadcast to the other DVRs.
Add/Delete DVRs managed by the Central User Management
Software.
Add/Delete/Modify User Accounts and User access
privileges.
Only the Administrator can modify settings. In order to open
the DVR Management or User Management options, the
Administrator must login.
Logs the Administrator OFF and locks access to the DVR
Management and User Management options.
This option exits the Management Station Software.
Document 900.0803 Rev 7
02/29