Pan / Tilt / Zoom
Creating a Preset Tour2
Viewing the Preset Tour2
Creating a Mimic Tour
Viewing the Mimic Tour
PTZ Status on Close
________________________________________________________________________________________________________
94
1.
Select two or more Preset Positions. See Creating a Preset above.
Select the Preset Tour2 Tour method.
2.
3.
Define a Travel Speed and Dwell Time for the tour.
Click the Apply button.
4.
1.
On the Main Display screen, click the PTZ button to open the graphical controller.
Click the video display of the desired PTZ camera.
2.
3.
Click the Tour button. The Preset Tour2 will activate.
Select the Mimic Tour Type.
1.
2.
Click the Controller button to open the PTZ graphical controller.
Click the Start Position button.
3.
4.
Using the PTZ Controller, move the PTZ in the path of the tour to mimic.
5.
Click the Stop Position button when finished moving the PTZ around.
Click OK or Apply to save.
6.
On the Main Display Screen click the PTZ button to open the graphical controller.
1.
2.
Click the video display of the desired PTZ camera.
3.
Click the Tour button. The Mimic Tour will activate.
The PTZ Status on Close option defines the default settings for a PTZ camera when the
controller is not open. This includes activating a tour, moving to a preset position or
leaving the camera as it.
Stay Put
Start Tour
Go To Preset
Leaves the PTZ in its present state.
Starts the Pre-Defined Tour function when the PTZ
controller is closed.
Moves to a Selected Preset position when the PTZ
controller is closed.
Document 900.0803 Rev 7
02/29