Table of Contents
Advertisement
Setup Options
________________________________________________________________________________________________________
52
Steps 9-15:
Schedule camera 3 to record using MOTION.
When Motion occurs it will activate Relay Output #7 and #10.
Select Sch02 from the Schedule Number drop down list.
9.
10. Select the Single Day Selection button, then select Yes.
11. Place a check in the boxes for SUN, MON, TUE, WED, THU, FRI, and SAT
days of the week.
12. On the Sch02 line (time selector grid), highlight the hours 00-23 and click Set.
13. Click Camera button #3 until the green Motion button is selected.
14. Click Relay buttons #7 and #10.
15. Click Apply to save.
Document 900.0803 Rev 7
02/29
Advertisement
Table of Contents
