Restarting The System - Cisco TelePresence System Codec C40 Administrator's Manual

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Contents

Restarting the system

The system can be shut down or restarted remotely using the
web interface.
D14636.10 Profile C60-C40 and Codec C60-C40
Introduction Web interface Web interface
Navigate to: Maintenance > Restart
Restarting the system
Click Restart TelePresence device...
restart the system.
It will take a few minutes before
the system is ready for use.
Administrator Guide TC6.1, APRIL 2013.
System settings
to
Shutting down the system
Click Shutdown TelePresence device...
to shut down the system.
The system cannot be turned on
again remotely; you must press
its power button physically to
turn it on.
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
50
Administrator Guide
Setting passwords Appendices