Controlling The Camera - Cisco TelePresence System Codec C40 Administrator's Manual

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Contents

Controlling the camera

You can control the camera using the Call Control page.
Click the Camera Control button to open the window where
you can pan, tilt and zoom the camera, and apply camera
presets.
D14636.10 Profile C60-C40 and Codec C60-C40
Introduction Web interface Web interface
Navigate to: Call Control > Call Control
Pan and tilt
Use the left and right
arrows to pan the camera,
and the up and down
arrows to tilt it.
Zoom
Use + and
in and out.
Administrator Guide TC6.1, APRIL 2013.
System settings
- to zoom
22
Setting passwords
Camera presets
If a camera preset is
defined it is listed here.
Apply the preset by clicking
its name.
Choose which camera to control
Click the arrow to open the
drop-down list. Then choose the
camera you want to control.
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices