Alignment - Canon Finisher-AB1 Service Manual

Chapter 3

3.5.4 Alignment

1) At the end of stacking, the swing guide is moved up, and then the aligning plate is operated as part of an
alignment operation (Note), causing the stack of sheets to move to the rear or to the front.
The foregoing sequence of operations applies only to the Tray B. A sequence of alignment operations is
executed for the tray A while paper is in the paper path.
3-28
[2]
F-3-26
[1]Aligning plate
[2]Stack
[3]Swing guide
[3]
[1]
0015-2087