Canon Finisher-AB1 Service Manual page 228

2) Fit the positioning pin [1] of the high-capacity
stacker to the position [A].
- 2 screws [2]
[1]
[2]
F-2-14
3) While lifting up the front latch support [1], fit the
positioning pin [2] of the high-capacity stacker to
the positioning plate hole [3] on the finisher for
connection.
<Front side>
[1]
F-2-15
[A]
4) Fix the front latch plate (front) [1].
<Rear side>
[2]
F-2-16
- 1 screw [2] (Use the screw removed in step 2 of
"Before Installing Finisher")
[2]
F-2-17
Chapter 2
[3]
[1]
2-7