DGS-6604
m
clear ip ospf
clear ip ospf
Syntax
Default
Command Mode
Usage Guideline
Example
Switch>enable
Switch# clear ip ospf
CLI Reference Guide
Use this command to restart the OSPF process.
None
None
Privileged EXEC
This command is used to restart the OSPF routing process. The following is a
situation where this command can be used:
• When a new route-ID is configured, it will not take effect until next time
the switc h is booted. When the OSPF process is restarted by this com-
mand, the new router-ID will take effect immediately without having to
reboot the switch.
This example shows how to restart all of OSPF processes
clear ip ospf
103