Setup Windows; [Property] Window - Sony DWR-R02DN User Manual

G RF (radio wave) level alert
Lights red when the radio wave input level decreases.
When the radio wave input level is high, this lights yellow.
H AF/PEAK (audio input/peak) alert
Lights red when the level of audio signal input to the transmitter
exceeds the transmitter's maximum input level setting.
I Audio output control/indicator
Indicates the status of audio output for the receiver channel.
Clicking the icon toggles the status of audio output.
: Audio output is enabled. Clicking the icon will enable
muting of the audio output.
: Audio output muting is enabled. Clicking the icon
will disable muting of the audio output.
Note
This setting can only be changed if the [Individual muting/
unmuting] checkbox is selected in the [Display settings]
window.
For details, see "[Display settings] Window" on page 54.
J AF level meter
Indicates the level of the audio signal input to the
transmitter according to four levels.
The way the meter lights will vary depending on the input
level setting of the transmitter.
• When the INPUT LEVEL settings of the transmitter is
MIC level
Unlit: The input level of the audio signal is less than
–36 dBFs.
1 bar lit: The input level of the audio signal is –36 dBFs
or more and less than –20 dBFs.
2 bars lit: The input level of the audio signal is –20 dBFs
or more and less than –3 dBFs.
3 bars lit: The input level of the audio signal is –3 dBFs
or more.
• When the INPUT LEVEL settings of the transmitter is
LINE level
Unlit: The input level of the audio signal is less than
–20 dBFs.
1 bar lit: The input level of the audio signal is –20 dBFs
or more and less than –10 dBFs.
2 bars lit: The input level of the audio signal is -10 dBFs
or more and less than –3 dBFs.
3 bars lit: The input level of the audio signal is –3 dBFs
or more.
K Battery condition display
Indicates the transmitter's battery condition.

Setup Windows

Wireless Studio includes the following setup windows:

• [Property] window

• [Channel Plan Adviser] window
• [Omit IP address list] window
• [Setting lock] window
• [Receiver CH Label settings] window
• [GP/CH display setting] window
• [Display settings] window
• [Other settings] window
• [Startup settings] window
• [Region setting] window
[Property] Window
This window allows you to view and change settings for
receivers and their paired transmitters.
a [Unlock Settings] / [Lock Settings] button
When setting modification is disabled due to the [Setting
lock] function, click this button and enter the password to
temporarily enable setting modification.
Close the [Property] window or click the button again to
relock settings.
For details on the [Setting lock] function, see "[Setting
lock] Window" on page 52.
44
1
2
3
4