Table of Contents
Advertisement
[Device List] Window
This window lists in a table all of the receivers and
RMU-01 units on the network and two receiver channels
of each receiver as operating channel information. It also
displays icons that indicate the status of each device.
a [+] (add) button
Opens the [Add a new device] window. Add a device to the
device list by specifying its type and IP address.
For details, see "Manually adding a receiver/RMU-01 to
the [Device List] window" on page 28.
b [–] (delete) button
Deletes the selected device or receiver channel from the
list (available in offline mode only).
c Device information button
Opens the [Device information] window. This allows you
to view device type and IP address information for devices
selected in the list.
For details, see "Confirming the device types and IP
addresses of devices registered in the [Device List]
window" on page 28.
d Property button
Opens the [Property] window. Use this to check or modify
the settings for the currently selected receiver or the
transmitter that is paired with that receiver.
For details, see "[Property] Window" on page 44.
e [Search] (automatic detection) button
Automatically detects and adds to the list receivers and
RMU-01 units on the same subnet (available in online
1
mode only).
2
f Receiver display
3
Indicates receiver names obtained from receivers on the
network that were added to the device list.
4
5
g Receiver channel display
Indicates the receiver channels of the receivers and
6
transmitter names obtained by metadata received from the
transmitter.
h RMU display
7
Indicates the name of the remote controlled units obtained
from RMU-01 units on the network that were added to the
device list.
Icons used to indicate status
The following icons are displayed to indicate the status of
8
the receivers or RMU-01 units on the network.
Device
Receiver
RMU-01
27
Icon
Meaning
Operating normally
No communication with
receiver.
If operating in online mode, the
receiver may be turned off, IP
addresses may be overlapping,
a network connection error
may have occurred, etc. Check
the status of each device.
This icon also appears in
offline mode.
Operating normally
No communication with RMU-
01.
If operating in online mode, the
RMU-01 may be turned off, IP
addresses may be overlapping,
a network connection error
may have occurred, etc. Check
the status of each device.
This icon also appears in
offline mode.
Advertisement
Table of Contents
