Cpu Boards - GE ApexPro Service Manual

CPU Boards

Revision C
Parts Lists, Drawings and Replacement: Disassembly/Assembly
1. Complete "Field Replacement Preparation"
2. Disconnect all jacks and plugs from the CPU board I/O ports at the back of the
ApexPro Telemetry Server.
3. Remove the chassis cover according to
4. Disconnect the CD data cable connector from the main CPU board.
5. Disconnect the power, and temperature sensor connectors from the receptacles
near the front left corner of the main CPU board. Note the position and
orientation of the connectors for reassembly.
Power
Connector
ApexPro Telemetry Server
2001989-178
on page 6-5.
"Chassis Cover" on page 6-10.
Temperature
Sensor
Connector
038A
097A
6-39