Toshiba GR200 Series Instruction Manual page 246

Defining SBO mode
Figure 3.7-16 exemplifies the GCNT01 logic node saved as "GIGO3302"; in the SBO mode, the
user should select the following items for the "GIGO3302$ISCSO" using GR-TIEMS:
Figure 3.7-16 LN editing screen for SBO mode (for example)
Defining DIR mode
Figure 3.7-17 exemplifies the GCNT01 logic node saved as save as "GIGO3302"; in the DIR
mode, the following three items should be selected using GR-TIEMS.
Figure 3.7-17 LN editing screen for DIR mode (for example)
SBOw

Oper

Cancel

Origin

stSeld

sboClass† (choice "operate-once")

ctlmodel (choice "SBOes or SBOns")

†"sboClass" can be found by scrolling down.
Oper

Origin

ctlmodel (choice "SBOes or SBOns" )

- 232 -
6F2S1931 (0.20)
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)