Configuring the System Printer
The default settings of the printer conguration are listed in Table B-1. To change
these settings, select the
Figure B-1.
PRINTER TYPE
PRINTER ADDRESS
PRINTER I/F
SPOOL DIRECTORY
SPOOL COMMAND
BAUD RATE (RS-232C) 9600 baud
PAGE LENGTH
MARGIN
PAGE NUMBERING
Figure B-2 shows a softkey map for conguring printer settings. Select the desired softkeys
and enter the required values and names to change printer settings.
B-2 Configuring the System Printer for PV4062/PV4062.F
softkey from the printer conguration page shown in
NNNNNNNNNNNNNNNNNNNNNNNNNN
RECONFIG
Table B-1. Default Printer Configuration Settings
Item
HP-UX SPOOL
701
HP-IB
/spool:REMOTE
lp
j
66 line/page
Top: 2 lines, Bottom: 2 lines, Left: 0 spaces
ON
Default