HP 4062UX Installation Manual page 156

5. If HP-IB settings are correct, select
This is a dummy self-test and results are not stored.
If the HP-IB settings of HP 54120B are incorrect (for example, wrong select code), select
the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
HP-IB ADDRESS
Enter address of HP 54120B (e.g. 2707)
You enter a new device selector. For example, type:
6.
Connection Test
Select softkey to execute the CONNECTION test.
NNNNNNNNNNNNNN
NEXT
CONNECTION Test is next. Press "NEXT" to continue.
xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
NEXT
c
7.
Calibration
a. Select softkey to execute the CALIBRATION test.
NNNNNNNNNNNNNN
NEXT
CALIBRATION is next. Press "NEXT" to continue.
xxxxxxxxxxxxxxxxxxx
NEXT
c
You can select a softkey to execute calibration for each HP 8110A individually or for all
HP 8110As.
b. Select the
NNNNNNNNNNN
ALL
the HP 8110A.
c. Press -
4 Shift 5 4 Menu 5
6-44 System Verification
NNNNNNNNNNNNNNNNN
START
softkey. The following prompt is displayed:
xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
SKIP
xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
SKIP
softkey. The calibration is executed for all the pulse generator units of
key, then select
NNNNNNNNNNNNNN
EXIT
softkey. Self-test of HP 8110As is executed.
.
707
4 Return 5
User 1
xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
User 1
xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
softkey twice to exit the test procedure.
Running
xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
EXIT
Running
xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx
EXIT
b
b