Initial Configuration and Operation
Event Schedule List
>
Editing the Event Schedule List
1.
Select an event trigger and press [Edit] button. An
event setup window will pop-up.
2. Make appropriate changes to the settings.
•
Trigger: The selected trigger event
•
Time: Set the day of the week, the time, pre-
alarm duration and Post alarm duration, and
the duration of the time during which the
inputs will be ignored.
•
Action: Set the actions to be taken as below;
-
FTP Server /SMTP Server: Choose whether
to upload the image to an FTP server or
send an e-mail to an SMTP server.
-
Control relay: Activate or deactivate a
selected relay.
-
SD Card Recording: Record the video feed
to the SD card when there is an event.
-
Flash LED: Turns on the Flash LED when
there is an event.
-
Sound Alert: Strike up a sound alarm in
case of an event.
-
FTP Server: The image (JPEG) will be sent
to the FTP server if an event occurs.
•
Stream: Choose the desired video feed stream
from the relevant camera.
3.
Press [Save] button to save the changes in settings.
57