LG Ipsolute LW130W-D Owner's Manual page 47

Initial Configuration and Operation
Wireless
Access Point
> Press [Refresh] button to refresh the list of the wireless
LAN access points detected around. The figures on the
left show the strength of the signal, while the names of
the access points are displayed on the right.
> Click [Info] to display the detailed information for each
selected access point. Press [Add] button to add the
access points to connect to.
> The added access points are displayed on the right panel
of the screen. Choose the added access point and press
[Connect] button to establish a connection. During the
connection attempt, 'Connecting' will be displayed on
the right side (in case an IP address is being assigned,
'IP assigning. ' ) When the connection is established, a
message saying 'connected, ' and when a connection
to a WPS is made, 'wps connected' will be displayed,
respectively.
> Press [Disconnect] to disconnect.
47