LG Ipsolute LW130W-D Owner's Manual page 43

Initial Configuration and Operation
Master / Slave
> RTP Unicast: Check this radio button when you are using
RTP unicast.
> RTP Multicast: Check this radio button when you are
using RTP multicast.
- Video RTP port: Set the number of Video RTP port.
The range of the possible port number is from
1,025 to 65,534.
- Audio RTP port: Set the number of Audio RTP port.
The range of the possible port number is from
1,025 to 65,534.
- Data RTP port: Set the number of Data RTP port.
The range of the possible port number is from
1,025 to 65,534.
- IP Address: Set the IP address for RTP multicast. The
range of the possible address is from 240.0.0 to
239.255.255.255.
Note:
When using multicast, avoid using the same port number with
the multicast to prevent the video stream from overwrapping.
Also, use unique IP addresses and port number for each
device, or there might be IP address collision between the
devices.
TTL
> TTL: Set the TTL(Time To Live) value. The default setting is
7, and the possible range of the value is from 1 to 225.
• Save: Press this button to save any changes you made.
43