LG Ipsolute LW130W-D Owner's Manual page 35

Initial Configuration and Operation
• The video image may be interrupted due to the nature
of Wi-Fi network if the device is using a wireless network.
Wired connections are recommended when you are
recording the video images.
Device Management
> Follow the steps below to use an SD Card;
1. Insert the SD card in the card slot.
2. Mount the card on the system by pressing [Mount]
button. If the card is successfully mounted, the
button is changed to [Unmount] button.
3. [Disk ID], [Status], and [Capacity] item information
will be displayed.
Notes:
• Once the card is mounted, press [Format] button to format
the card for stable performance of the storage. When the
format is completed, press [Mount] button again to mount
the card again.
• When you try to format the card, sometimes the
formatting sequence would not start for a while. In this
case, wait for some time and try to begin formatting by
pressing the [Format] button again.
> To remove the card from the system;
1. Press [Unmount] button to unmount the card from
the system. Once the unmounting is completed,
the [Mount] button will appear.
2. Pull out the card from the socket.
Note:
When you attempt to unmount a card, sometimes the
unmounting sequence would not start. This is because the
system is still writing or reading data on the card as you
attempt the unmounting.
File format
Select the record file format. Select [AVI] or [DAT] format.
Notes:
• The same file format used for SD card recording or FTP
(video) transmission will be applied depending on the
user's settings.
- If the recording format is set to AVI, [Network Failure
Recording] function will be disabled.
35