Table of Contents
Advertisement
Initial Configuration and Operation
3.
Log on to LG Smart Web Viewer
LG Smart Web Viewer runs on most of the web browsers.
We recommend Windows Internet Explorer for this
application.
3.1 Run IP Utility software to search of any LG IP Device.
3.2 Once the search result screen is up, you may either
double click on the detected LG IP devices or right
click them to select [Connect to Web Page] menu. If
the connection is successfully established, a log on
pop up window will show up.
3.3 Input your username and password. (The default
administrator username and password are both set
to 'admin'from the factory.)
3.4 Click [OK], and LG Smart Web Viewer Screen comes
up in your web browser.
Notes:
•
There is an alternative way to access to LG Smart
Web Viewer, as follows;
3.1 Launch your web browser.
24
3.2 Input the IP address of the target LG IP device
on the address bar of your web browser, and
then press 'Enter' on your keyboard.
3.3 Input your username and password.
3.4 Click [OK] and LG Smart Web Viewer Screen
will come up in your web browser.
•
The launching of LG Smart Web Viewer may take
a few minutes in accordance with your network
condition.
•
If the log on window does not pop up, check
whether the pop-up blocking mode is activated,
and deactivate the pop-up blocking mode in your
web browser's settings.
•
When connecting to an LG IP device for the first
time, a security warning message will be displayed
for the installation of the operating programs for
Smart Web Viewer. Make sure you say yes for the
installation. Without the program, LG Smart Web
Viewer software will not work properly.
•
When your network or computer has a firewall
activated or proxy setting, LG Smart Web Browser
would not run. Change the proxy or firewall settings
to allow LG Smart Web Browser to run.
Advertisement
Table of Contents
