Table of Contents
Advertisement
3.3.3
Rack Mounting Dimensions
When mounting the robot controller in a rack, set the side brackets using the screw
holes provided on both ends of the front panel, and secure the controller to the rack.
The side brackets 1 in Fig. 3.11 are optional.
Fig. 3.11 Screw hole dimensions for securing controller
3.3.4
Precautions for Rack Mounting
Pay attention to the following matters when rack-mounting the robot controller.
a)
When mounting the robot controller in a rack, use the screw holes provided on
both ends of the front panel, and secure the controller. (Optional side brackets
are required.)
•
If the rack is completely sealed, provide holes to allow the air to be let out,
force-ventilate the rack with a fan, or cool it indirectly so that the heat will not
be trapped in the rack.
If the heat is trapped in the rack or controller, faults could occur.
TRANSPORTATION AND INSTALLATION MANUAL
!
CAUTION
– 35 –
STE80753
Advertisement
Table of Contents
