Table of Contents
Advertisement
•
If any parts of the equipment are found damaged or any accessories are missing
after the shipment containing the robot and controller have reached your office, DO
NOT install and operate them. Otherwise, the equipment will malfunction.
Contact Toshiba Machine immediately.
•
Dispose of the wooden pallet, corrugated cardboards, polyethylene shipping bags
and cushion material according to the customer's in-house regulations.
2.2
Transportation
Move the robot and controller very carefully. Make sure that no excessive impact or
vibration is exerted on the equipment. If the equipment is to be subject to vibration
over a long period, be sure to tighten all the clamp and base set bolts completely.
If the equipment is to be moved to a location some distance from where it was
unpacked, reposition the cushions as they were and put the equipment back into the
corrugated cardboards.
2.2.1
Mass and Dimensions
The mass and outer dimensions of each robot are shown in Fig. 2.2 to Fig. 2.4.
For the mass and outer dimensions of the controller, see Fig. 3.9 of Para. 3.3.1.
TRANSPORTATION AND INSTALLATION MANUAL
!
Mass of robot body
76 kg
Clamp
Fig. 2.2 Outer dimensions at transport (TH850A)
DANGER
– 17 –
STE80753
Advertisement
Table of Contents
