Nokia 7210 Configuration Manual page 572

Service access switch 7210 sas-m, t, r6, r12, mxp, sx, s basic system
Hide thumbs Also See for 7210:
Table of Contents

Advertisement

System Management
To switch between the low and high modes, the user must remove all SAP configurations,
change the mode, reboot the node, and reconfigure the SAPs and services.
The mandatory QoS configurations required to achieve higher SAP and service scaling are
as follows.
Note: Refer to the 7210 SAS-M, T, Mxp, Sx, S Services Guide and 7210 SAS-R6, R12
Services Guide for more information about high SAP scale mode and low SAP scale mode.
The no form of this command disables the use of high SAP and service scaling for Epipe and
VPLS services.
Default
no sap-scale-mode
Parameters
mode — Specifies the SAP scale mode.
high — Keyword to enable higher SAP and service scaling.
low — Keyword to disable higher SAP and service scaling.
6.12.2.1.19
global-res-profile
Syntax
global-res-profile
Context
config>system
572
• Access port-based egress queuing and shaping must be configured on all ports,
including service delivery ports and uplinks.
• On the 7210 SAS-Mxp, either access port-based ingress classification or SAP ingress
table-based classification and table-based policing (service meters) can be configured
on uplinks for higher SAP scaling.
• On the 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx/S 1/10GE, and 7210 SAS-Sx 10/
100GE, access port-based ingress classification and policing must be configured for
higher SAP scaling.
• On the 7210 SAS-Mxp, Epipe and VPLS SAPs must use SAP ingress table-based
classification and table-based policing on service delivery ports for higher SAP scaling.
The 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx/S 1/10GE, and 7210 SAS-Sx 10/
100GE do not support table-based policing (service meters) for SAP ingress policing.
• On the 7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12, IES and VPRN SAPs can
use table-based classification.
• R-VPLS SAPs must use CAM-based classification and policing.
Values
high, low
Global System Resource Profile Commands
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas-mxp7210 r67210 r127210 s7210 sx7210 t

Table of Contents