System Boot Options On 7210 Sas-T, 7210 Sas-R6, And 7210 Sas-R12 - Nokia 7210 Configuration Manual

Service access switch 7210 sas-m, t, r6, r12, mxp, sx, s basic system
Hide thumbs Also See for 7210:
Table of Contents

Advertisement

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
During bootup, the bootrom searches for the boot.tim image in the internal flash
(cf1:\) and uses the image obtained from this location to load the bootstrap image. If
the boot.tim image is not found in this location, the boot procedure fails. If the
boot.tim image is found, the system searches for bof.cfg (the boot options file) in the
root directory on the storage device. That is, if boot.tim is found on cf1:\, the system
also looks for bof.cfg in cf1:\bof.cfg.
If bof.cfg is found, the system uses the BOF to locate the TiMOS software (both.tim
file), configuration file, and other boot parameters, and processes them to boot the
system. If the BOF is not found, the system attempts to retrieve the BOF from the
network using the auto-init mode and create a new BOF as part of the auto-init
process.
Refer to the appropriate 7210 SAS chassis installation guide for more information
about booting the system using these options.
4.1.4.2
These 7210 SAS platforms support the following options to retrieve the boot.tim and
TiMOS/SROS images (both.tim) required to boot the system:
Because multiple storage locations are available for the bootstrap image boot.tim file
on the 7210 SAS-T, 7210 SAS-R6, and 7210 SAS-R12, these platforms do not
support the golden bootstrap image.
During bootup, the bootrom searches for the boot.tim in the following locations in the
specified order and uses the image obtained from the first location where boot.tim is
found to load the bootstrap image:
3HE 17358 AAAB TQZZA
System Boot Options on 7210 SAS-T, 7210 SAS-R6, and
7210 SAS-R12
• internal flash (cf1:\)
• external flash (cf2:\)
• external USB flash (uf1:\)
• network (with auto-init)
This option is supported only on the 7210 SAS-T.
• network (without auto-init)
• cf1:\ (internal USB)
• cf2:\ (external flash)
• uf1:\ (external USB)
Use subject to Terms available at: www.nokia.com
© 2021 Nokia.
Boot Options
125

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas-mxp7210 r67210 r127210 s7210 sx7210 t

Table of Contents