Nokia 7210 Configuration Manual page 184

Boot Options
Note: After the BOF is reset, the system may not boot up with the last saved system
configuration unless the new BOF also uses the same configuration file. If booting the
system with the last saved system configuration is required, it is recommended to run the
admin>save file-url command to save the current system configuration and modify the BOF
to use this configuration file.
Use the following syntax to reset the BOF and reboot.
CLI Syntax:
Example: *A:ALA-1# admin reboot auto-init
WARNING: Configuration and/or Boot options may have changed since the last save.
Are you sure you want to reset the bof and reboot (y/n)? Y
Resetting...OK
Nokia 7210 Boot ROM. Copyright 2016 Nokia.
All rights reserved. All use is subject to applicable license agreements.
184
admin# reboot auto-init [now]
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 17358 AAAB TQZZA