Nokia 7210 Configuration Manual page 200

Boot Options
Default uplinkA-duplex full
Parameters full — Keyword to set the link to full duplex mode.
half — Keyword to set the link to half duplex mode.
uplinkB-duplex
Syntax uplinkB-duplex {full | half}
Context bof
Platforms 7210 SAS-M (network mode and access-uplink mode), 7210 SAS-Mxp, 7210 SAS-Sx/S 1/
10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-T (network mode and access-uplink mode)
Description This command configures the duplex mode of the uplinkB port when auto-negotiation is
disabled in the running configuration and the BOF.
This configuration command allows for the configuration of the duplex mode of the Ethernet
port. If the port is configured to auto-negotiate, this parameter will be ignored.
Note: The uplinkB-autoneg command is not valid for 10gig ports. Therefore, whenever the
user selects 10gig ports as uplinkB-port, the uplinkB-autoneg command defaults to no
uplinkB-autoneg, speed as uplinkB-speed 10000, duplex as uplinkB-duplex full, as
shown in the following output sample.
#uplinkB Port Settings:
Default uplinkB-duplex full
Parameters full — Keyword to set the link to full duplex mode.
half — Keyword to set the link to half duplex mode.
200
uplinkA-speed 10000
uplinkA-address 0
uplinkA-vlan 0
uplinkB-port 1/1/26
no uplinkB-autoneg
uplinkB-duplex full
uplinkB-speed 10000
uplinkB-address 0
uplinkB-vlan 0
Use subject to Terms available at: www.nokia.com
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
© 2021 Nokia.
Configuration Guide
3HE 17358 AAAB TQZZA