Release 7.0.0 3DB 19286 ACAA Issue 01
Provision cross connections in a mixed fiber/
microwave Ring
Figure 438
Node I to NE G (protected): pass-through cross-connection on Node A
4. Configure a pass-through cross-connection on Node B, see
628
a. Choose the flow IDs to cross-connect from the Available VLANs list
b. Choose the Service profile: TDM2TDM or TDM2ETH
c. Choose the Clock Source, if the Service profile is TDM2ETH
d. Enter the Ring Destination MAC address: NE G Multicast MAC address
e. Enter the Ring Source MAC address: Node A Unicast MAC address
WebEML User Manual
Figure
439.